SCROLL DOWN FOR.... Whites, Minelab, Garrett & Fisher Inline Probes, Accessory Coils and more...

Note: Only Actual Shipping Charges Will Be Added & Billed To Your Credit Card

20% Restocking Fee On All Returns (NO Returns After 7 Days)

NOTE: Your Explorer II or Quattro upper shaft must be sent to Sun Ray for the X-1 Probe installation or a new one may be purchased from your dealer or direct from Sun Ray. Contact your local Sun Ray Dealer or Sun Ray Detector Electronics direct for full details. When ordering X-1 be sure to state which arm you swing with (right or left) for proper probe switch installation.

(WARNING: The Explorer XS & S upper shaft is not recommended for use with the new Explorer II/Quattro control housing and may damage the locking system.) NOTE: We except no responsibility for any damage caused to the Explorer II/Quattro control housing if you choose to use the XS & S upper shaft for your X-1 Probe installation on the new Explorer II/Quattro.)

SUN RAY PRO "GOLD" HEADPHONES

Sun Ray Detector Electronics is proud to introduce our new Sun Ray Pro "Gold" Headphones. We decided to offer a high quality set of professional headphones without the highest price! Plus we have now added even more new features making these the premier metal detector headphones on the market today!! The Sun Ray Pro "Gold" version are manufactured according to the following specifications:

• High output 150 ohm (nominal impedance) speaker elements which are certified as hearing aid compatible and are sensitive enough to pick up even the faintest of signals. Aluminum case construction with polymer cones for moisture and sweat protection.
• Dual multi position "segmented or detent" volume controls with NEW BLACK & YELLOW KNOBS for that "Sun Ray" look!.
• "New" Enhanced Limiter Circuit with on/off switch. (For more pronounced reduction in loud blasts from surface targets, while allowing the faintest of signal responses to be clearly heard. Limiter results will vary from one detector model to another.)
• Mode selector switch makes the new Sun Ray Pros compatible with most metal detectors.
• NEW TOGGLE SWITCH BOOTS keep moisture and dirt out of toggle switches!
• "New" comfortable, lightweight dual swivel point ear cups with all "new" soft leather muffs.
  The new foam padded soft leather muffs are not only more comfortable than the earlier vinyl muffs, they do not develop a "memory". They conform to the shape of your head around your ears when worn and when taken off return to their original shape! Vinyl which normally has a life expectancy of (3) three years can get harder with time and the elements, which can cause a less comfortable fit as well as a noticeable increase in ambient (outside) noise. The former version of the Sun Ray Pros yield a 24 decibel reduction in ambient noise blocking ability when new. The new Sun Ray Pro "Gold" version yields a 26 decibel reduction in ambient noise blocking ability and continues to block that noise day in and day out, year in and year out because they stay soft and comfortable!
• "New" adjustable soft leather headband.
• One of the industries most durable coiled cables with NEW EXTERNAL STRAIN RELIEF and 1/4" right angle, molded GOLD PLATED PLUG!

The new Sun Ray Pros will deliver a crisp audio response with volume to spare!

Limited Lifetime Warranty!

SUN RAY INVADER™ FX-1 TARGET PROBE
(Compatible with the Fisher F-75 Metal Detector)

The new Sun Ray Invader FX-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of Fisher F-75 owners. Now F-75 owners can enjoy the same benefits our quality Sun Ray in-line probes have offered users of previous Fisher models! Here are some of the features of the FX-1:

• Fully compatible with the Fisher F-75 model only. The FX-1 is precision built to ensure peak performance.
• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, operation modes, ground and moisture conditions!
• New compact, light weight, waterproof/submersible 6" X 1" diameter probe mounts nicely along arm rest for easy access. FX-1 probe and cable weigh approx. 5 oz. FX-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 10 oz total!
• While the FX-1 probe is waterproof the switch box is water resistant and must not be submersed.
• Installation requires no tools or modifications to the detector. Switch box and probe clips are attached by removable velcro lined clips.
• The FX-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions!
• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a 30" straight cable with strain relief for "tangle free" operation.
• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
• FX-1 switch box is conveniently mounted on detector pole in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
• No extra batteries required as the FX-1 utilizes the detectors power source.
• Complete installation & operation instructions included.

FULL 12 MONTH WARRANTY!!
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and
you'll wonder how you ever got along without it!!

Sun Ray Invader FE-1 Probe for Fisher ID Excel

• Fully compatible with the Fisher ID Excel model only. The FE-1 is precision built to ensure peak performance.
• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, ground and moisture conditions!
• Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely along arm rest for easy access. FE-1 probe and cable weigh approx. 6 oz. FE-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 11 oz total!
• While the FE-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as Fisher.)
• Installation requires no tools or modifications to the detector. Switch box and probe clips are attached by removable velcro lined clips.
• The FE-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions!
• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a 30" straight cable with strain relief for "tangle free" operation.
• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
• FE-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
• No extra batteries required as the FE-1 utilizes the detectors power source.
• Complete installation & operation instructions included.

  SUN RAY INVADER™ FE-1 TARGET PROBE
  For Fisher ID Excel
  Qty: Price: $179.95
  
  View Shopping Cart | Empty Shopping Cart

Sun Ray Invader YF-1 Probe for Garrett Ace 150, Ace 250 and the Garrett GTP and GTAx series

• Fully compatible with the Garrett ACE 150 & 250 models and with the flip of a switch is compatible with the GTP 1350 and selected GTAX models specifically the GTAX 550, 750 & 1250. (NOTE: Early GTAX models including the GTAX 350, 400, 500 & 1000 are not compatible due to a different "center pin" connector used. If you need a YF-1 for one of these early models call us direct at (319) 636-2244 and ask for Ralph for information on YF-1 custom connector options. The YF-1 is precision built to ensure peak performance.
• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on detector used, settings, ground and moisture conditions!
• New compact, Light weight, waterproof/submersible 6" X 1" diameter probe mounts on top of upper shaft or along arm rest rod depending on model) for easy access. YF-1 probe and cable weigh approx. 5 oz. YF-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - 10 oz total!
• While the YF-1 probe is waterproof, the switch box is water resistant and must not be submersed. (We use the same connectors as Garrett.)
• Installation requires no tools or modifications to the detector.
• The YF-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions (depending on model)! (On the GTP the YF-1 profiling function accuracy may be off and depth reading will be off due to the probe's diameter, which is normal.)
• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation.
• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
• "Mode" switch (see lower left photo) shuts off coil as it turns on probe and vise versa. Coil and probe are never on at the same time.
• New "Detector Selection Switch" (see lower right photo) allows you to switch between ACE series models and GTP/GTAX series models for proper Target ID and operation!
• YF-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggles from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
• No extra batteries required as the YF-1 utilizes the detectors power source.
• Complete installation & operation instructions included.

  SUN RAY INVADER™ YF-1 TARGET PROBE
  For Garrett Ace 150, Ace 250 and the Garrett GTP and GTAx series
  Qty: Price: $179.95
  
  View Shopping Cart | Empty Shopping Cart

Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for Garrett metal detectors! The new Sun Ray Invader GI-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of Garrett GTI users. We have received many requests for in-line target probes by Garrett brand users for some time due to the popularity of our quality in-line probes for Minelab, White's and Fisher metal detectors. Now Garrett owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the GI-1:

• Fully compatible with all Garrett GTI models (including the 1500, 2000, 2500)! The GI-1 is precision built to ensure peak performance.
• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on detector used, settings, ground and moisture conditions!
• Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft for easy access. GI-1 probe and cable weigh approx. 6 oz. GI-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 11 oz total!
• While the GI-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as Garrett.)
• Installation requires no tools or modifications to the detector.
• The GI-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions! (The GI-1 probe is non-imaging and depth reading will be off due to the probe's diameter, which is normal.)
• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation.
• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
• GI-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
• No extra batteries required as the GI-1 utilizes the detectors power source.
• Complete installation & operation instructions included.
• FULL 12 MONTH WARRANTY!!

SUN RAY S-1 SUPER TARGET PROBE

• Accurate "Bulls eye" pinpointing on coin size targets up to 3" deep in all metal mode! 1 1/2" - 2" accurate tone ID in discriminate mode! (NOTE: Greater depth on larger than coin size targets)
• Accurate visual ID when used with Sun Ray or Minelab digital meter!
• Uses the Elite's BBS circuitry to cancel ground effects and reject most hot rocks!
• No buzzers or lights necessary. All target responses come directly through your headphones! Makes hand held probes obsolete!
• No extra batteries required!
• S-1 probe is 1" X 9" long, comes with a very flexible heavy duty custom 30" straight cable for "tangle free" operation and is submersible.
• S-1 switch box slides onto the meter mounting bracket and the meter slides onto the top of the S-1 switch box allowing you to see the Minelab meter display easier and allows switching from coil to probe and back with the flip of your thumb!
• Probe is detachable from S-1 switch box for direct insertion to Elite control housing for stand alone detecting/pinpointing!
• Includes S-1 Probe Clip Attachment for attaching S-1 probe along side arm rest when not in use!
• Ultra Light Weight! The "New" S-1 has a smaller, more compact switch box and weighs 2 1/2 oz less than original S-1. Probe w/cable=7 oz / S-1 switch box=5 oz / overall weight including 2 probe clips=13 oz!
• S-1 switch box comes with a short standard length cable and connects directly into your Minelab or Sun Ray meter.
• Optional 12" switch box extension cable available if mounting your Elite or GT control housing under the arm rest w/o a meter. Optional 50" switch box extension cable available if hip/chest mounting Elite control housing w/o a meter.
• Complete installation & operation instructions included.

SUN RAY INVADER™ FE-1 TARGET PROBE FOR FISHER ID EXCEL

Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for Fisher metal detectors! The new Sun Ray Invader FE-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of Fisher ID Excel users. We have received many requests for in-line target probes by Fisher brand users for some time due to the popularity of our quality in-line probes for Minelab and White's metal detectors. Now Fisher owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the FE-1:

• Fully compatible with the Fisher ID Excel model only. The FE-1 is precision built to ensure peak performance.
• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, ground and moisture conditions!
• Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely along arm rest for easy access. FE-1 probe and cable weigh approx. 6 oz. FE-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 11 oz total!
• While the FE-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as Fisher.)
• Installation requires no tools or modifications to the detector. Switch box and probe clips are attached by removable velcro lined clips.
• The FE-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions!
• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a 30" straight cable with strain relief for "tangle free" operation.
• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
• FE-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
• No extra batteries required as the FE-1 utilizes the detectors power source.
• Complete installation & operation instructions included.

(Compatible with Fisher CZ model detectors)

Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for Fisher metal detectors! The new Sun Ray Invader FZ-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of Fisher CZ users. We have received many requests for in-line target probes by Fisher brand users for some time due to the popularity of our quality in-line probes for the Minelab and White's detectors. Now Fisher owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the FZ-1:

• Fully compatible with all Fisher CZ models (except CZ-20)! The FZ-1 is precision built to ensure peak performance.
• Accurate "bullseye" pinpointing on coin size targets up to 3" + deep depending on detector used, settings, ground and moisture conditions!
• Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely along arm rest for easy access. FZ-1 probe and cable weigh approx. 6 oz. FZ-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 11 oz total!
• While the FZ-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as Fisher.)
• Installation requires no tools or modifications to the detector. Switch box and probe clips are attached by removable velcro lined clips.
• The FZ-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions! (Above features may vary from one CZ model to another and depth reading will be off due to the probe's diameter which is normal.)
• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a 30" cable with strain relief for "tangle free" operation.
• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
• FZ-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
• No extra batteries required as the FZ-1 utilizes the detectors power source.

FULL 12 MONTH WARRANTY!! (Shipping Wt. 2 lb)

Sun Ray X-1 Target Probe Minelab Explorer S, XS, II & Quattro

• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, ground and moisture conditions!
• Light weight, waterproof/submersible 1" X 9" probe. Comes with a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation, and mounts nicely along the Explorer's battery compartment or on top of upper shaft.
• Very compact, ultra light switch box mounted on bottom of upper shaft makes for easy switching from coil to probe. Makes coil changes super fast as coil cable will no longer be inserted into upper shaft! While the X-1 probe is waterproof the switch box is water resistant and must not be submersed.
• X-1 gives operator ALL of the same functions as stock coil including accurate visual and audible target ID in both Smartfind & Digital mode, non-motion pinpoint, etc.
• Accurate approximate depth indications from tip of probe to target can be achieved through visual observation of the Explorer's depth gauge (although the scale will be different). Scale is explained in X-1 instructions. Accuracy on coin size targets only.
• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
• No external buzzers or lights are needed as all targets are heard clearly through your detector headphones!
• No extra batteries required as the X-1 utilizes the detectors power source.
  Complete installation & operation instructions included.

SUN RAY INVADER™ XL-1 TARGET PROBE
(Compatible with White's XLT and other 6.592 khz models)

• Fully compatible with XLT and models using 6.592 khz including Eagle (series), Spectrums, Pro XL, Quantum XT, 6000 Di Pro, 5900 Di Pro, IDX Pro, Classic ID, Classic I, II & III S/L, etc. ! The XL-1 is precision built to ensure peak performance on those models!
• Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on detector used, settings, ground and moisture conditions!
• Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft (which has been very popular among Explorer users). XL-1 probe and cable weigh approx. 6 oz. XL-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5 oz. - approx. 11 oz total! (Optional box mount probe clip attachment available for those wishing to mount probe along side of detector control housing - presently available for the slim-line control boxes like the XLT, IDX Pro, etc).
• While the XL-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as White's.)
• XL-1 incorporates all of the same functions as the stock coil including accurate visual and audible target ID (if the detector model provides those functions) along with identical pinpoint functions! (Depth reading will be off due to the probe's diameter which is normal.)
• High quality custom made, durable probe and connector cable used with identical specifications as White's cable for precision performance! (NOTE: Probe now available in either partially coiled or straight cable (less tangles).
• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
• XL-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
• No extra batteries required as the XL-1 utilizes the detectors power source.
• Complete installation & operation instructions included.

Sun Ray Intruder S-5 Coil For Minelab Sovereign (all versions)

• Maximum target separation in extreme high trash conditions!
• 5.5" Double-D coil!
• Excellent depth capabilities.
• Waterproof/submersible!
• Coil cover included!
• Weighs only 12 oz!
• FULL 12 MONTH WARRANTY!
  

Sun Ray Stealth X-5 For Minelab Explorer S, XS, II & Quattro

• Maximum target separation in extreme high trash conditions!
• 5.5" Double-D coil!
• Excellent depth capabilities!
• Waterproof/submersible!
• Coil cover included!
• Weighs only 10 oz!
• FULL 12 MONTH WARRANTY!
  

Sun Ray Stealth X-8 For Minelab Explorer S, XS, II & Quattro

• Full 8" Double-D coil!
• Waterproof/submersible!
• Good ground coverage!
• Great Depth!
• Ultra stable operation!
• Ultra light weight - less than 16 oz!
• Superior target separation over stock 10.5" coil!
• Coil cover included!
• FULL 12 MONTH WARRANTY!
  

Sun Ray Intruder S-8 For Minelab Sovereign (all versions)

• Waterproof/submersible!
• Good ground coverage!
• Great Depth!
• Full 8" Double-D coil!
• Ultra stable operation!
• Ultra light weight - only 18 1/2 to 19 oz - lighter than BBS 800 and older Coinsearch coil!
• Superior target separation over BBS 1000 coil
• Coil cover included!
• FULL 12 MONTH WARRANTY!
  

Sun Ray Intruder S-12 ForMinelab Sovereign (all versions)

• By popular demand we have produced this ultra light weight coil for those wanting a large coil with great depth but without the extra weight.
• Full 12.5" Double-D coil!
• Great ground coverage!
• Great Depth!
• Ultra light weight - only 23 1/2 oz - less than stock 10" coil!
• Waterproof/submersible!
• Includes open fitted coil cover. s
• FULL 12 MONTH WARRANTY!!
  

Sun Ray Stealth X-12 Coil For Minelab Explorer S, XS, II & Quattro

• By popular demand we have produced this ultra light weight coil for those wanting a large coil with great depth but without the extra weight!
• Full 12.5" Double-D coil!
• Great ground coverage!
• Great Depth!
• Ultra light weight - only 20 1/2 oz - less than stock 10.5" coil!
• Waterproof/submersible!
• Includes open fitted coil cover.
• FULL 12 MONTH WARRANTY!!
  

Sun Ray Explorer 10.5 inch Coil Plugs for Minelab Explorer S, XS, II & Quattro 10.5"

• Turns your open coil into a solid coil for hunting dry beach sand, long grass, corn and bean stubble fields, etc. No more annoying sticks, long grass and beach sand sticking through the openings and causing drag while sweeping the coil!
• Reduces or eliminates falsing from above obstructions!
• Extremely light weight. Only 1 oz ea. (Two plugs per set)
• Simply pop them in place and your ready for any land hunting situation! Sun Ray Coil Plugs easily pop out when not needed!

Sun Ray Explorer S, XS, II & Quattro 10.5" Coil Support Bracket Kit

• Eliminates coil "creeping" when digging targets.
• Ten possible coil positions.
• Allows coil to be tipped up when hunting hills, banks, walls, etc.
• Made of sturdy ABS plastic.
• Reduces stress on coil bolt

WATERPROOF 5-PIN IN-LINE CONNECTORS
(Excellent for modifying your Minelab Excalibur or other 4-5 pin water detectors for coil interchange!!)

* Makes changing coils on your water detector a snap!
* Easy installation!
* Some knowledge of soldering and wiring required.
* Recommended for shallow water hunting. Not recommended for deep diving situations.

Contact us for more information or to place an order.

We do not offer detailed installation instructions and results may vary. We do not guarantee results. We do guarantee the connectors to be free of defects. You should contact your detector/coil manufacturer for wire pin ID, etc. before attempting installation.

NOTE: NOT RECOMMENDED FOR DETECTORS WHICH ARE UNDER WARRANTY!! YOUR WARRANTY COULD BE VOIDED!!

(NOTE: 1 male connector required for detector side. 1 female connector per coil required.)