Garrett Sea Hunter Mark II

Sea Hunter Mark II

Technical data at a glance
Microprocessor Controlled, Pulse Induction Operating System
Automatic Cancellation of Salt and Ground Minerals
* Frequency – 750 Pulsation Per Second (PPS)
Submersible to 200 Feet (65 Meters)
Full Range Discrimination
* Audio Target Alert Indicaiton
Submersible Underwater Headphones
Dual Discrimination Modes
* Standard Discrimination Mode
* Conventional Pulse Detection. Constant Audio Threshold. Slight or Weak audio signals indicate Small or Deep Targets. Loud, Strong signals indicate Large or Shallow Targets. This offers the deepest detection possible and is particularly useful in areas where little trash is experienced.
* Discrete Discrimination Mode
*Sea Hunter Mark II Exclusive Feature. It is similar in operation to detectors with Motion Discrimination. It provides more enhanced and precise target discrimination. Constant Audio Threshold until an acceptable target is encountered. It then gives a sharp audio response characteristic of motion detectors.
This Unique Feature is especially useful in areas of high trash concentration.
Buoyancy: Near Neutral

Battery Data:
* Automatic Battery Check
8 AA Batteries – Included
Sealed Battery Compartment – Externally Accessible
Operating Time Approximately 24 Hours

Searchcoil – Nominal 9 Inch, Epoxy Filled
Optional Searchcoil – 9"x13", Epoxy Filled
3-Piece Stem Design

Electronic Housing Mounting Locations (Long Stem or Short Stem Diving)
* Above Stem
Below Stem
Beneath Cuff
Off Stem – Waist-/Chest-Mount Pouch Included

Operating Controls (3):
* Power, Standard Discrimination Mode, Discrete Discrimination Mode
Discrimination (Target Elimination) – Fully Adjustable
Audio – 10-Turn (Precise Adjustment) Threshold Control

Operating weight:
* Control Housing – 31oz.
Headphones – 11oz.
Scuba Mate Stem/Coil Assembly – 33oz.
Long Stem/Coil Assembly – 42oz.

Download PDF